2012
Deng, X., and Pellegrino, S. (2012) Wrinkling of orthotropic viscoelastic membranes. AIAA Journal, 50(3), 668-681. (pdf)
Kwok, K., & Pellegrino, S. (2012). Micromechanical modeling of deployment and shape recovery of thin-walled viscoelastic composite space structures. 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 April 2012 Honolulu, Hawaii.
Lopez Jimenez, F., Pellegrino, S. (2012) Failure of carbon fibers at a crease in a fiber-reinforced silicone sheet. Accepted for publication in Journal of Applied Mechanics. (pdf)
Lopez Jimenez, F., Pellegrino, S. (2012) Constitutive modeling of fiber composites with a soft hyperelastic matrix. International Journal of Solids and Structures, 49, February 2012(3-4), 635-647.(pdf)
Lopez Jimenez, F., Pellegrino, S. (2012) Folding of fiber composites with a hyperelastic matrix. International Journal of Solids and Structures, 49, February 2012(3-4), 395-407. (pdf)
Mallikarachchi, H. M. Y. C. and Pellegrino, S. (2012) Failure criterion for two-ply plain-weave CFRP laminates. Accepted for publication in Journal of Composite Materials. (pdf)
Maqueda, I., Pellegrino, S., and Mejia-Ariza, J. (2012). Characterization of a high strain composite material. 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 April 2012 Honolulu, Hawaii. (pdf)
Ning, X., and Pellegrino, S. (2012). Design of lightweight structural components for direct digital manufacturing. 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 April 2012 Honolulu, Hawaii. (pdf)
Olson, G. M., Pellegrino, S., Costantine, J., & Banik, J. (2012). Structural architectures for a deployable wideband UHF antenna. 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 April 2012 Honolulu, Hawaii. (pdf)
Patterson, K., Yamamoto, N., & Pellegrino, S. (2012). Thin deformable mirrors fora reconfigurable space aperture. 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 23-26 April 2012 Honolulu, Hawaii.
Tan, L. T. and Pellegrino, S. (2012) Thin-shell deployable reflectors with collapsible stiffeners: experiments and simulations. AIAA Journal, 50(3), 659-667. (pdf)
2011
Deng, X., and Pellegrino, S., (2011) A technique to predict clefting of lobed super-pressure balloons. 11th AIAA ATIO Conference, 20-22 September, Virginia Beach, AIAA-2011-6830. (pdf)
Guest, S. D., Kebadze, E., and Pellegrino, S., (2011) A zero-stiffness elastic shell structure. Journal of Mechanics of Materials and Structures 6, 203-212. (pdf)
Kwok, K., and Pellegrino, S., (2011) Large strain viscoelastic model for balloon film. 11th AIAA ATIO Conference, 20-22 September, Virginia Beach, AIAA-2011-6939. (pdf)
Mallikarachchi, H. M. Y. C. and Pellegrino, S. (2011). Design and validation of thin-walled composite deployable booms with tape-spring hinges. 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 4-7 April 2011, Denver, CO, AIAA 2011-2019. (pdf)
Mallikarachchi, H. M. Y. C. and Pellegrino, S. (2011). Quasi-static folding and deployment of ultra-thin composite structures. Journal of Spacecraft and Rockets, 48(1), 187-198.(pdf)
Kwok, K. and Pellegrino, S. (2011). Viscoelastic effects in tape springs. 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 4-7 April 2011, Denver, CO, AIAA 2011-2022.(pdf)
Patterson, K. and Pellegrino, S. (2011). Shape correction of thin mirrors. 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 4-7 April 2011, Denver, CO, AIAA 2011-1827.(pdf)
Santer, M., and Pellegrino, S., (2011) Concept and design of a multistable plate structure. ASME Journal of Mechanical Design, 133(8}. (pdf)
Stohlman, O. R. and Pellegrino, S. (2011). Effects of component properties on the accuracy of a joint-dominated deployable mast. 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 4-7 April 2011, Denver, CO, AIAA 2011-2163. (pdf)
Underwood, C., and Pellegrino, S., Autonomous assembly of a reconfigurable space telescope (AAReST) for astronomy and earth observation. 8th IAA Symposium on Small Satellites for Earth Observation, April 4-8, 2011 Berlin, 2011. (pdf)
2010
Deng, X., and Pellegrino, S. (2010) Shape of Super-Pressure Balloons. In Spatial Structures: Temporary and Permanent (edited by: Q. Zhang, L. Yang, Y. Hu), China Architecture and Building Press, Shanghai.
Deng, X., and Pellegrino, S. (2010) Wrinkling of orthotropic viscoelastic membranes. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 12-15 April 2010, Orlando, FL, AIAA-2010-2670. (pdf)
Kwok, K., and Pellegrino, S. (2010) Shape recovery of viscoelastic deployable structures. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 12-15 April 2010, Orlando, FL, AIAA-2010-2606. (pdf)
Mallikarachchi, H. M. Y. C., and Pellegrino, S. (2010) Optimized designs of composite booms with integral tape-spring hinges. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 12-15 April 2010, Orlando, FL, AIAA-2010-2750.(pdf)
Pagitz, M., and Pellegrino, S. (2010). Maximally stable lobed balloons. International Journal of Solids and Structures, 47, 1496-1507.(pdf)
Patterson, K., Pellegrino, S. and Breckinridge, J. (2010). Shape correction of thin mirrors in a reconfigurable modular space telescope. SPIE Astronomical Instrumentation, San Diego, 2010, SPIE Conf. 7731-72 (pdf)
Stohlman, O. R., and Pellegrino, S. (2010) Shape accuracy of a joint-dominated deployable mast. 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 12-15 April 2010, Orlando, FL, AIAA-2010-2605.
Winslow, P., Pellegrino, S., and Sharma, S. B. (2010). Multi-objective optimization of free-form grid structures. Structural and Multidisciplinary Optimization, 40, 257-269. (pdf)
2009
Deng, X., and Pellegrino, S. (2009) Finite element simulations of clefting in lobed super-pressure balloons. AIAA Balloon Systems Conference. 4-7 May 2009, Seattle, WA, AIAA-2009-2816.
Gerngross, T., and Pellegrino, S. (2009) Anisotropic viscoelasticity and wrinkling of superpressure balloons: simulation and experimental verification. AIAA Balloon Systems Conference, 4-7 May 2009, Seattle, WA, AIAA-2009-2815. (pdf)
Lopez Jimenez, F. and Pellegrino, S. (2009) Folding of thin-walled composite structures with a soft matrix. 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 4-7 May 2009, Palm Springs, CA, AIAA-2009-2633.(pdf)
Mallikarachchi, H.M.Y.C. and Pellegrino, S. (2009) Deployment dynamics of composite booms with integral slotted hinges. 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 4-7 May 2009, Palm Springs, CA, AIAA-2009-2631. (pdf)
Mallikarachchi, H.M.Y.C., and Pellegrino, S. (2009) Folding and deployment of ultra-thin composite structures. Proceedings of International Scientific Conference on Advanced Lightweight Structures and Reflector Antennas, Institute of Constructions, Special Systems and Engineering Maintenance of the Georgian Technical University, pp. 48-57, 14-16 October 2009, Tbilisi, Georgia. (pdf)
Quadrelli, M.B., Boussalis, D., Davis, G., Kwok, K., and Pellegrino, S. (2009) Structural and control concepts for variable geometry planetary entry systems. 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 4-7 May 2009, Palm Springs, CA, AIAA-2009-2100. (pdf)
Santer, M. and Pellegrino, S. (2009) Topological optimization of compliant adaptive wing structure. AIAA Journal, Vol 47, No. 3, 523-534.(pdf)
2008
Deng, X., and Pellegrino, S. (2008) Computation of partially inflated shapes of stratospheric balloon structures. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 7-10 April 2008, Schaumburg, Illinois, AIAA-2008-2133. (pdf)
Gerngross, T., Xu, Y. and Pellegrino, S. (2008) Viscoelastic behaviour
of pumpkin balloons. Advances in Space Research 42(10), 1683-1690.(pdf)
Howard, P., Watt, A.M., and Pellegrino, S. (2008). Deployable support structure. UK Patent, UK-GB0316734.3; European Patent EP03254474.4; World Patent WO2055/1011056.
Mallikarachchi, H.M.Y.C., and Pellegrino, S. (2008) Simulation of quasi-static folding and deployment of ultra-thin composite structures. 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, 7-10 April 2008, Schaumburg, Illinois, AIAA-2008-2053. (pdf)
Papa, A. and Pellegrino, S. (2008). Systematically creased thin-film membrane structures. Journal of Spacecraft and Rockets 45(1), 10-18.
Santer, M. and Pellegrino, S., (2008) Compliant multistable structural elements. International Journal of Solids Structures, 45, 6190-6204. (pdf)
Schioler, T. and Pellegrino, S. (2008). A bistable structural element. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 222(C11), 2045-2051.
Soykasap, O., Pellegrino, S., Howard, P., and Notter, M. (2008). Folding large antenna tape spring. Journal of Spacecraft and Rockets 45(3), 560-567.
Tan, G. E. B. and Pellegrino, S. (2008). Nonlinear vibration of cable-stiffened pantographic deployable structures. Journal of Sound and Vibration 314, 783-802.
Winslow, P., Sharma, S.B., and Pellegrino, S. (2008) Multi-objective optimization of free-form grid structures. EngOpt 2008 - International Conference on Engineering Optimization. 1-5 June 2008, Rio de Janeiro, Brazil.(pdf)
Winslow, P., Sharma, S.B., and Pellegrino, S. (2008) Subdivision techniques for optimization of free-form structures. In J.G. Oliva-Salinas, editor, IASS Symposium 2008. Acapulco, Mexico.
Winslow, P., Pellegrino, S. (2008). Mapping two-way grids onto free-form surfaces. Journal of the International Association for Shell and Spatial Structures, 49(2).
Winslow, P. and Pellegrino, S. (2008). Free form grid structures. The Structural Engineer, 86, 19-20.
2007
Gerngross, T., and Pellegrino, S. (2007), Implementation and validation
of Schapery-Rand anisotropic viscoelasticity model for super-pressure
balloons. AIAA Balloon Systems Conference, 21-24 May, 2007, Williamsburg,
VA, AIAA-2007-2632. (pdf)
Gerngross, T. and Pellegrino, S. (2007). Modelling of anisotropic
viscoelastic behaviour in super-pressure balloons. 48th AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, 23-26
April 2007, Honolulu, Hawaii, AIAA-2007-1808. (pdf)
Karni, E. and Pellegrino, S. (2007). A retractable small-span roof based on thin-walled lightweight spatial units. International Journal of Space Structures, 22(2), 93-106.
Kueh, A. and Pellegrino, S. (2007). ABD matrix of single-ply triaxial
weave fabric composites. 48th AIAA/ASME/ASCE/AHS/ASC Structures,
Structural Dynamics and Materials Conference, 23-26 April 2007,
Honolulu, Hawaii, AIAA-2007-2161. (pdf)
Kueh, A. B. H. and Pellegrino, S. (2007). Triaxial weave fabric composites. Department of Engineering, University of Cambridge. Report CUED/D-STRUCT/TR223.
Pagitz, M., and Pellegrino, S. (2007), Shape optimization of pumpkin balloons.
AIAA Balloon Systems Conference, 21-24 May, 2007, Williamsburg,
VA, AIAA-2007-2606. (pdf)
Pagitz, M. and Pellegrino, S. (2007). Buckling pressure of pumpkin balloons. International Journal of Solids and Structures, 44, 6963-6986.
Santer, M. J. and Pellegrino, S. (2007). Implementation of load-path
topology optimisation in Samcef for the generation of compliant
structures. 10th Samtech Users' Conference, 13-14 March 2007, Liege,
Belgium. (pdf)
Santer, M. J. and Pellegrino, S. (2007). Topology optimization of
adaptive compliant aircraft wing leading edge. 48th AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, 23-26
April 2007, Honolulu, Hawaii, AIAA-2007-1712. (pdf)
Schioler, T., and Pellegrino, S. (2007). Space frames with multiple stable configurations. AIAA Journal 45(7), 1740-1747.
Winslow, P., Pellegrino, S., and Sharma, S.B. (2007). Mapping
two-way grids onto free-form surfaces. IASS
Symposium 2007, 3-6 December 2007, Venice, 2007. (pdf)
2006
Gan, W. W., and Pellegrino, S. (2006). A numerical approach to
the kinematic analysis of deployable structures forming a closed
loop. Proceedings of the Institution of Mechanical Engineers Part C: Journal of Mechanical Engineering Science, 220, 1045-1056.(pdf)
Guest, S. D., and Pellegrino, S. (2006). Analytical models for
bistable cylindrical shells. Proceedings of the Royal Society A,
462(3), 839-854. (pdf)
Howard, P., Notter, M., Hall, C.D., and Pellegrino, S. (2006). A space based radar antenna concept for global biomass measurement. RF Sensors Conference, Estec, ESA.
Howard, P., Notter, M., Hall, C.D., and Pellegrino, S. (2006). A space based radar antenna concept to counter camouflage and concealment. NATO RTO Specialists' Meeting "Emerging and Future Technologies for Space-Based Operations Support to NATO Military Operations", 6-7 September 2006, Bucharest, Romania.
Kueh, A., and Pellegrino, S. (2006). Thermo-elastic behaviour
of single ply triaxial woven fabric composites. 47th AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, 1-4 May
2006, Newport, RI, AIAA-2006-1899.
Pagitz, M., and Pellegrino, S. (2006). Computation of buckling
pressure of pumpkin balloons. 47th AIAA/ASME/ASCE/AHS/ASC Structures,
Structural Dynamics and Materials Conference, 1-4 May 2006, Newport,
RI, AIAA-2006-1803. (pdf)
Pagitz, M., Xu, Y., and Pellegrino, S. (2006). Stability
of lobed balloons. Advances in Space Research 37, 2059-2069.
Pellegrino, S. (2006). New concepts for spacecraft antennas and
radar structures based on ultra-thin composites. 46th Israel Annual
Conference on Aerospace Sciences, Tel Aviv and Haifa. (pdf)
Soykasap, O., Pellegrino, S., Howard, P., and Notter, M. (2006).
Tape spring large deployable antenna. 47th AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, 1-4 May
2006, Newport, RI, AIAA-2006-1601. (pdf)
Tan, L. T., and Pellegrino, S. (2006).Thin-shell deployable reflectors
with collapsible stiffeners: Part 1 Approach. AIAA Journal, 44(11), 2515-2523.(pdf)
Wong, Y. W., and Pellegrino, S. (2006). Wrinkled membranes. Part
I: experiments. Journal of Mechanics of Materials and Structures,
1(1), 1-23. (pdf)
Wong, Y. W., and Pellegrino, S. (2006). Wrinkled membranes. Part
II: analytical models. Journal of Mechanics of Materials and Structures,
1(1), 25-59. (pdf)
Wong, Y. W., and Pellegrino, S. (2006). Wrinkled membranes. Part
III: numerical simulations. Journal of Mechanics of Materials and
Structures, 1(1), 61-93. (pdf)
2005
Datashvili, L., Lang, M., Nathrath, N., Zauner, Ch., Baier, H., Soykasap, O., Tan, L.T., Kueh, A., Pellegrino, S., Fasold, D. (2005). Technical assessment of high accuracy large space borne antenna. Munich, Technical University Munich, pp. 146.
Datashvili, L., Nathrath, N., Lang, M., Baier, H., Fasold, D., Pellegrino,
S., Soykasap, O., Kueh, A., Tan, L. T., Mangenot, C., and Santiago-Prowald,
S. (2005). New concepts and reflecting materials for space borne
large deployable reflector antennas. In: 28th
ESA Antenna Workshop on Space Antenna Systems and Technologies (edited by: N.Morssink), 31
May-3 June 2005, ESTEC, Noordwijk, The Netherlands.
Gan, W. W., and Pellegrino, S. (2005). Kinematic
bifurcations of closed-loop deployable frames. Computation of Shell
and Spatial Structures, June 1-4, 2005, Salzburg, Austria. (pdf)
Jensen, F., and Pellegrino, S. (2005). Expandable "blob" structures.
Journal of the International Association for Shell and Spatial
Structures, 46, 151-158. (pdf)
Kueh, A., Soykasap, O., and Pellegrino, S. (2005).
Thermo-mechanical behaviour of single-ply triaxial weave carbon
fibre reinforced plastic. In: European
Conference on Spacecraft Structures, Materials and Testing 2005,
9-13 May 2005 (edited by J. Rocks and K. Fletcher), Noordwijk, The Netherlands, ESA SP-581.
Pagitz, M., Xu, Y., and Pellegrino, S. (2005). Buckling
of pumpkin balloons. Computation of Shell and Spatial Structures,
June 1-4, 2005 (edited by E. Ramm, W.A. Wall, K.U. Bletzinger, M. Bischoff), Salzburg, Austria.
Papa, A., and Pellegrino, S. (2005). Mechanics of
systematically creased thin-film membrane structures. 46th AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, 18-21
April 2005, Austin, TX, AIAA 2005-1975.
Pellegrino, S. (2005). Bistable shell structures.
46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and
Materials Conference, 18-21 April 2005, Austin, TX, AIAA 2005-1934.
Plante, J.-S., Santer, M. J., Dubowsky, S., and
Pellegrino, S. (2005). Compliant bistable dielectric elastomer
actuators for binary mechatronic systems. Proceedings of IDECT/CIE
2005: ASME Mechanism and Robotics Conference,24-28 Aeptember 2005,
Long Beach, CA.
Santer, M. J., and Pellegrino, S. (2005). Asymmetrically-bistable
tetrahedra. 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural
Dynamics and Materials Conference, 18-21 April 2005, Austin, TX,
AIAA 2005-2104.
Soykasap, O., Watt, A. M., and Pellegrino, S. (2005).
New concept for ultra-thin deployable structures. Journal
of the International Association for Shell and Spatial Structures,
46 (147), 3-8.
Soykasap, O., Watt, A. M., Pellegrino, S., and Howard,
P. (2005). Novel concept for all-composite deployable SAR reflectors.
European Conference on Spacecraft Structures, Materials and Testing,
9-13 May 2005, ESA Estec.
Soykasap, O., Watt, A. M., Pellegrino, S., and Howard,
P. (2005). Novel concept for deployable antenna reflectors.
28th ESA Antenna Workshop on Space Antenna
Systems and Technologies, 31 May-3 June 2005 (edited by N. Morssink), ESTEC, Noordwijk,
The Netherlands.
Tan, L. T., Soykasap, O., and Pellegrino, S. (2005).
Design & manufacture of stiffened spring-back reflector demonstrator.
46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and
Materials Conference, 18-21 April 2005, Austin, AIAA 2005-2048.
Wong, Y. W., and Pellegrino, S. (2005). Wrinkles
in square membranes. In; Textile Composites and Inflatable Structures,
(edited by E. Onate and B. Kroplin) Springer, Dordrecht, 109-122.
Ye, H., and Pellegrino, S. (2005). Bi-stable cylindrical
space frames. 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural
Dynamics and Materials Conference, 18-21 April 2005, Austin, TX,
AIAA 2005-1870.
Yee, J. C. H., and Pellegrino, S.(2005). Biaxial
bending failure locus for woven-thin-ply carbon fibre reinforced
plastic structures. 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural
Dynamics and Materials Conference,18-21 April 2005, Austin, TX,
AIAA 2005-1811.
Yee, J. C. H., and Pellegrino, S. (2005). Composite
tube hinges. Journal of Aerospace Engineering, 18(October), 224-231.
Yee, J. C. H., and Pellegrino, S. (2005). Folding
of woven composite structures. Composites Part A, 36(2), 273-278.
2004
Buhl, T., Jensen, F.V. and Pellegrino, S. (2004).
Shape optimization of cover plates for retractable roof structures.
Computers & Structures 82(15-16), 1227-1236. (pdf)
Kebadze, E., Guest, S. D. and Pellegrino, S. (2004).
Bistable prestressed shell structures. International Journal of Solids and Structures 41, 2801-2820.pdf)
Murphey, T.W. and Pellegrino, S. (2004). A novel
actuated composite tape-spring for deployable structures. In Proc.
45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and
Materials Conference, 19-22 April 2004, Palm Springs, CA AIAA 2004-1528.
(pdf)
Santer, M.J. and Pellegrino, S. (2004). An asymmetrically-bistable
monolithic energy-storing structure. In Proc. 45th AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, 19-22
April 2004, Palm Springs, CA AIAA 2004-1527. (pdf)
Schioler, T. and Pellegrino, S. (2004). Multi-configuration
space frames. In Proc. 45th AIAA/ASME/ASCE/AHS/ASC Structures,
Structural Dynamics and Materials Conference, 19-22 April 2004,
Palm Springs, CA AIAA 2004-1529. (pdf)
Soykasap, Ö. and Pellegrino, S. (2004). Deployable
synthetic aperture radar reflector. Department of Engineering,
University of Cambridge, Report CUED/D-STRUCT/TR209. (pdf)
Soykasap, O., Watt, A.M. and Pellegrino, S. (2004).
New deployable reflector concept. In Proc. 45th AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, 19-22
April 2004, Palm Springs, CA AIAA 2004-1574. (pdf)
Tan, L.T. and Pellegrino, S. (2004). Ultra thin deployable
reflector antennas. In Proc. 45th AIAA/ASME/ASCE/AHS/ASC Structures,
Structural Dynamics and Materials Conference, 19-22 April 2004,
Palm Springs, CA AIAA 2004-1730. (pdf)
Tibbalds, B., Guest, S. D. and Pellegrino, S. (2004). Inextensional packaging of thin shell slit reflectors. Technische Mechanik, 24(3-4), 211-220.(pdf)
Watt, A. M. and Pellegrino, S. (2004). Rigid Deployable
Solar Array. Department of Engineering, University of Cambridge,
Report CUED/D-STRUCT/TR214. (pdf)
Yee, J.C.H., Soykasap, O. and Pellegrino, S. (2004).
Carbon fibre reinforced plastic tape springs. In Proc. 45th AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, 19-22
April 2004, Palm Springs, CA AIAA 2004-1819. (pdf)
2003
Baier, H., Datashvili, L., Nathrath, N., and Pellegrino, S. (2003). Technical assessment of high accuracy large space borne reflector antennas. Munich, Institute of Lightweight Structures, Technical University of Munich, pp 70.
Gan, W. W. and Pellegrino, S. (2003). Closed-loop deployable structures. In
Proc. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics
and Materials Conference, 7-10 April 2003, Norfolk, VA AIAA
2003-1450. (pdf)
Kukathasan, S. and Pellegrino, S. (2003). Nonlinear vibration
of wrinkled membranes. In Proc. 44th AIAA/ASME/ASCE/AHS/ASC Structures,
Structural Dynamics and Materials Conference, 7-10 April 2003,
Norfolk, VA AIAA 2003-1747. (pdf)
Ong, P. P. A. and Pellegrino, S. (2003). Modelling of seabed interaction
in frequency domain analysis of mooring cables. In Proc. 22nd International
Conference on Offshore Mechanics and Arctic Engineering, June 8-13,
Cancun, Mexico, ASME. (pdf)
Ong, P. P. A. and Pellegrino, S. (2003). Modelling of touchdown behaviour of catenary morrings in frequency domain. 5th International Symposium on Cable Dynamics, 15-18 September 2003, Santa Margherita, Italy.
Soykasap, O., Watt, A. M., and Pellegrino, S. (2003). Ultra-high performance deployable structures. 5th Asia Pacific Structural Engineering and Construction Conference, 26-28 August 2003, Johor Bahru, Malaysia, Department of Structures and Materials, Universiti Teknologi Malaysia.
Tibert, A. G. and Pellegrino, S. (2003). Deployable tensegrity
masts. In Proc. 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural
Dynamics and Materials Conference, 7-10 April 2003, Norfolk, VA
AIAA 2003-1978. (pdf)
Tibert, G. and Pellegrino, S. (2003). Review of form-finding
methods for tensegrity structures. International Journal of Space Structures, 18(4), 209-223. (pdf)
Wong, Y. W., and Pellegrino, S. (2003). Wrinkled membranes. In:
Textile Composites and Inflatable Structures (edited by E. Onate and B. Kroplin) CIMNE, Barcelona. (pdf)
Wong, Y. W., Pellegrino, S. and Park, K. C. (2003). Prediction
of wrinkle amplitudes in square solar sails. In Proc. 44th AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, 7-10
April 2003, Norfolk, VA AIAA 2003-1982. (pdf)
Yee, J. C. H. and Pellegrino, S. (2003). Foldable composite structures.
In Proc. IASS-APCS 2003, 22-26 October 2003, Taipei, Taiwan (Edited
by C. S. Chen), IASS. (pdf)
2002
Drew, H. R. and Pellegrino, S. (2002). New approaches to structural mechanics, shells and biological structures. Dordrecht, Kluwer Academic Publishers.
Jensen, F. and Pellegrino, S. (2002). Expandable structures formed
by hinged plates. In Proc. Fifth International Conference on Space
Structures, 19-21 August, 2002, Guildford, Surrey (Edited by G.
A. R. Parke and P. Disney), Thomas Telford Limited. (pdf)
Kukathasan, S. and Pellegrino, S. (2002). Vibration of Prestressed
Membrane Structures in Air. In Proc. 43rd AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, 22-25
April 2002, Denver, CO, AIAA 2002-1368. (pdf)
Ong, P. P. A., and Pellegrino, S., and Cheng, X. M. (2002). Improved approximation of extreme tensions for frequency domain analysis of mooring cables. 7th IBC Deepwater Risers, Moorings and Anchorings, 16-17 October 2002, London.
Pellegrino, S. (2002). CRTS reflectors. In Proc. 25th ESA Antenna
Workshop on Satellite Antenna Technology, 18-20 September 2002,
ESTEC, Noordwijk, The Netherlands. (pdf)
Pellegrino, S. (2002). Deployable membrane reflectors. In Proc.
2nd World Engineering Congress, 22-25 July, 2002, Sarawak, Malaysia
pp 1-9. (pdf)
Pellegrino, S., Kebadze, E., Lefort, T. and Watt, A.M. (2002).
Low-cost hinge for deployable structures. Department of Engineering,
University of Cambridge, Report CUED/D-STRUCT/TR202. (pdf)
Tan, L. T. and Pellegrino, S. (2002). Stiffness design of spring
back reflectors. In Proc. 43rd AIAA/ASME/ASCE/AHS/ASC Structures,
Structural Dynamics and Materials Conference, 22-25 April 2002,
Denver, CO, AIAA 2002-1498. (pdf)
Tan, L. T. and Pellegrino, S. (2002). Stiffened Springback reflectors.
In Proc. 25th ESA Antenna Workshop on Satellite Antenna Technology,
18-20 September 2002, ESTEC, Noordwijk, The Netherlands. (pdf)
Tibert, G. and Pellegrino, S. (2002). Deployable tensegrity reflectors
for small satellites. Journal of Spacecraft and Rockets, 39(5), 701-709. (pdf)
Watt, A.M. and Pellegrino, S. (2002). Tape-spring rolling hinges.
In Proc. 36th Aerospace Mechanisms Symposium May 15-17, 2002, Glenn
Research Center (2002) (pdf)
Wong, Y. W. and Pellegrino, S. (2002). Computation of wrinkle
amplitudes in thin membranes. In Proc. 43rd AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, 22-25
April 2002, Denver, CO, AIAA 2002-1369. (pdf)
Wong, Y. W. and Pellegrino, S. (2002). Amplitude of wrinkles
in thin membranes. New Approaches to Structural
Mechanics, Shells and Biological Structures, (Edited by H. Drew
and S. Pellegrino), pp 257-270, Kluwer Academic Publishers. (pdf)
2001
Dietrich, R. and Pellegrino, S. (2001). Feasibility study of
a deployable mesh reflector: Phase II. Technical Report CUED/D-STRUCT/TR199,
Department of Engineering, University of Cambridge.
Jensen, F. and Pellegrino, S. (2001). Arm development: review
of existing technologies. Department of Engineering, University
of Cambridge, Report CUED/D-STRUCT/TR198 (pdf)
Kukathasan, S. and Pellegrino, S. (2001). Vibration of Prestressed
Membrane Reflectors. Technical report CUED/D-STRUCT/TR194, Department
of Engineering, University of Cambridge. (pdf)
Lai, C.-Y. and Pellegrino, S. (2001). Umbrella-type furlable
reflector based on tension-truss concept. In Proc. 42nd AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, 16-19
April 2001, Seattle WA AIAA 2001-1481.
Lai, C. Y. and Pellegrino, S. (2001). Design and testing of a
1.5 m offset CRTS reflector demonstrator. Technical Report CUED/D-STRUCT/TR193,
Department of Engineering, University of Cambridge. (pdf)
Lai, C. Y. and Pellegrino, S. (2001). Non-linear finite element
analysis of CRTS reflectors. Technical Report CUED/D-STRUCT/TR192
Department of Engineering, University of Cambridge. (pdf)
Pellegrino, S. (2001). Collapsible Rib-Tensioned Surface (CRTS)
Technology Development: Final Report. Technical Report CUED/D-STRUCT/TR195
Department of Engineering, University of Cambridge. (pdf)
Pellegrino, S. (2001). Deployable Structures, Springer Verlag, Wien-New York.
Tibert, G. and Pellegrino, S. (2001). Furlable reflector concept
for small satellites. In Proc. 42nd AIAA/ASME/ASCE/AHS/ASC Structures,
Structural Dynamics and Materials Conference, 16-19 April 2001,
Seattle WA AIAA 2001-1261. (pdf)
2000
Fischer, A. and Pellegrino, S. (2000). Interaction between gravity
compensation system and deployable structure. Journal of Spacecraft
and Rockets, 36.
Iqbal, K. and Pellegrino, S. (2000). Bi-stable composite shells.
In Proc. 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics,
and Materials Conference and Exhibit, 3-6 April 2000, Atlanta,
GA, AIAA-2000-1385. (pdf)
Iqbal, K., Pellegrino, S. and Daton-Lovett, A. (2000). Bi-stable
composite slit tubes. In Proc. IUTAM-IASS Symposium on Deployable
Structures (edited by S. Pellegrino and S.D. Guest), 6-9 September, 1998 Cambridge, Kluwer. (pdf)
Kumar, P. and Pellegrino, S. (2000). Kinematic bifurcations in
the simulation of deployable structures. In Proc. IASS-IACM 2000
Fourth International Colloquium on Computation of Shell and Spatial
Structures, 5-7 June 2000, Chania, Crete. (pdf)
Kumar, P. and Pellegrino, S. (2000). Computation of kinematic
paths and bifurcation points. International Journal of Solids and Structures, W.T. Koiter Commemorative Issue, 37(46-47), 7003-7027.
Lai, C. Y. and Pellegrino, S. (2000). Feasibility study of a
deployable mesh reflector. Technical Report CUED/D-STRUCT/TR186,
Department of Engineering, University of Cambridge.
Lennon, B. A. and Pellegrino, S. (2000). Stability of lobed inflatable
structures. In Proc. 41st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics,
and Materials Conference and Exhibit, 3-6 April 2000,
Atlanta, GA, AIAA-2000-1728. (pdf)
Pellegrino, S. Green, C., Guest, S.D. and Watt A. (2000). SAR
Advanced Deployable Structure. Technical Report CUED/D-STRUCT/TR191,
Department of Engineering, University of Cambridge. (pdf)
Pellegrino, S., and Guest, S. D. (2000). IUTAM-IASS Symposium
on Deployable Structures: Theory and Applications, Kluwer Academic
Publishers, Dordrecht.
Pellegrino, S. Kukathasan, S., Tibert, G. and Watt, A. (2000).
Small Satellite Deployment Mechanisms. Technical Report CUED/D-STRUCT/TR190,
Department of Engineering, University of Cambridge. (pdf)
Schulz, M. and Pellegrino, S. (2000). Equilibrium paths of mechanical
systems with unilateral constraints. Part 1: Theory. Proceedings of the Royal Society of London Series A, 456, 2223-2242.
(pdf)
Schulz, M. and Pellegrino, S. (2000). Equilibrium paths of mechanical
systems with unilateral constraints. Part 2: Deployable reflector.
Proceedings of the Royal Society of London Series A, 456, 2223-2242. (pdf)
Seffen, K. A., You, Z. and Pellegrino, Z. (2000). Folding and
deployment of curved tape springs. International Journal
of Mechanical Sciences, 42(10), 2055-2073.
Seffen, K. A., Pellegrino, S. and Parks, G. T. (2000). Deployment
of a panel by tape-spring hinges. In Proc. IUTAM-IASS Symposium
on Deployable Structures: Theory and Applications (edited by S. Pellegrino and S.D. Guest) 6-9 September
1998, Cambridge, U.K. Kluwer.
Tan, L. T. and Pellegrino, S. (2000). Stiffening method for "spring-back" reflectors.
In Proc. IASS-IACM 2000 Fourth International Colloquium on Computation
of Shell and Spatial Structures, 5-7 June 2000, Chania, Crete. (pdf)
1999
Darby, A. P. and Pellegrino, S. (1999). Modeling and control
of a flexible structure incorporating inertial stick-slip actuators.
Journal of Guidance, Control, and Dynamics, 22, 36-43.
Kangwai, R., Guest, S. D. and Pellegrino, S. (1999). An introduction
to the analysis of symmetric structures. Computers & Structures,
71, 671-688.
Kassabian, P. E., You, Z. and Pellegrino, S. (1999). Retractable
roof structures. Proceedings of the Institution of Civil Engineers Structures and Buildings & Bldgs, 134,
45-56.(pdf)
Lai, C. Y. and Pellegrino, S. (1999). Deployable membrane reflectors
with offset configuration. In Proc. AIAA/ASME/ASCE/AHS/ASC Structures,
Structural Dynamics and Materials Conference, St Louis AIAA-99-1477.
Lai, C. Y. and Pellegrino, S. (1999). Shape and stress analysis
of offset CRTS reflectors. CUED/D-STRUCT/TR177 Department of Engineering,
University of Cambridge. (pdf)
Pellegrino, S. (1999). An introduction to deployable structures.
In Proc. Textile Roofs '99: Fourth International Workshop on the
Design and Practical Realisation of Architectural Membrane Structures,
17-19 June 1999, Technical University of Berlin (Edited by L. Grundig)
Seffen, K. A. and Pellegrino, S. (1999). Deployment dynamics
of tape springs. Proceedings of the Royal Society of London, series
A, 455, 1003-1048.
1998
Fischer, A. and Pellegrino, S. (1998). Interaction between gravity
compensation system and deployable structure. In Proc. 39th AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, 20-23
April, 1998 Long Beach, CA pp 1183-1192, AIAA-98-1835.
Lai, C. Y., You, Z. and Pellegrino, S. (1998). Shape of deployable
membrane reflectors. ASCE Journal of Aerospace Engineering, 11,
73-80.
Lai, C. Y., You, Z. and Pellegrino, S. (1998). High precision
shaping of deployable membrane reflectors. In Proc. SPACE98, April
26-30, 1998, Albuquerque, New Mexico (Edited by R. G. Galloway
and S. Lokaj), pp 46-52, ASCE.
Pellegrino, S. (1998). Deployable Structures. In Proc. Current
and Emerging Technologies of Shell and Spatial Structures, 28-30
April 1997, Madrid (Edited by J. Abel, R. Astudillo and N. K. Srivastava),
pp 175-188, IASS.
Pellegrino, S. and Miura, K. (1998). Deployable structures: from
spacecraft to buildings. In Proc. Engineering a New Architecture,
26-28 May, 1998 Aarhus School of Architecture, Denmark (Edited
by P. Dombernowsky and T. Wester), pp 61-70, Aarhus School of Architecture
.
Schulz, M. and Pellegrino, S. (1998). 'Multi-path" motion
of deployable structures. Proceedings of Fourth World
Congress on Computational Mechanics, 29 June-2 July, Buenos Aires
(Edited by S. R. Idelsohn, E. Onate and E. N. Dvorkin), CIMNE,
Barcelona. (pdf)
Tibbalds, B., Guest, S. D. and Pellegrino, S. (1998). Folding
concept for flexible surface reflectors. In Proc. 39th AIAA/ASME/ASCE/AHS/ASC
Structures, Structural Dynamics and Materials Conference, 20-23
April, 1998 Long Beach, CA pp 1193-1201. AIAA-98-1836.
1997
Darby, A. P. and Pellegrino, S. (1997). Active alignment control
of a payload using non-linear, long-stroke actuators. In Proc.
IUTAM Symposium on Interaction between Dynamics and Control in
Advanced Mechanical Systems, 21-26 April, 1996, Eindhoven University
of Technology (Edited by D. H. v. Campen), pp 91-100, Kluwer Academic
Publishers, Dordrecht.
Darby, A. P. and Pellegrino, S. (1997). Inertial stick-slip actuator
for active control of shape and vibration. Journal of Intelligent
Materials Systems and Structures, Journal of Intelligent Materials Systems and Structures, 8(12), 1001-1011.
Huang, W. and Pellegrino, S. (1997). Nitinol actuators for deployable
space structures. In Proc. International Conference on Shape Memory
and Superelastic Technologies, 2-6 March 1997, Pacific Grove, CA
(Edited by A. Pelton).
Kassabian, P. E., You, Z. and Pellegrino, S. (1997). Retractable
structures based on multi-angulated elements. In Proc. International
Colloquium on Structural Morphology, Nottingham, U.K. (Edited by
J. C. Chilton).
Lai, C.-Y., You, Z. and Pellegrino, S. (1997). Shape and stress
analysis of symmetric CRTS reflectors. Technical Report CUED/D-STRUCT/TR170
Department of Engineering, University of Cambridge. (pdf)
Seffen, K. A. and Pellegrino, S. (1997). Deployment of a rigid
panel by tape-springs. Technical Report CUED/D-STRUCT/TR168 Department
of Engineering, University of Cambridge. (pdf)
Seffen, K. A., You, Z. and Pellegrino, S. (1997). Folding and
deployment of curved springs. Technical Report CUED/D-STRUCT/TR171
Department of Engineering, University of Cambridge.
Tan, G. E. B. and Pellegrino, S. (1997). Non-linear dynamic identification: an application to prestressed cable structures. Journal of Sound and Vibration, 208 (1),33-45.
You, Z. and Pellegrino, S. (1997). Cable-stiffened pantographic
deployable structures. Part 2: Mesh Reflector. AIAA Journal, 35,
1348-1355.
You, Z. and Pellegrino, S. (1997). Foldable bar structures. International
Journal of Solids and Structures, 34, 1825-1847.
1996
Guest, S. D. and Pellegrino, S. (1996). Design optimization of
a solid surface deployable reflector. In Proc. IUTAM Symposium
on Optimization of Mechanical Systems, 26-31 March 1996, Stuttgart,
Germany (Edited by D. Bestle and W. Schielen), 105-112. Kluwer
Academic Publishers, Dordrecht.
Guest, S. D. and Pellegrino, S. (1996). The folding of triangulated
cylinders, Part III: Experiments. ASME Journal of Applied Mechanics,
63, 77-83.(pdf)
Guest, S. D. and Pellegrino, S. (1996). A new concept for solid
surface deployable antennas. Acta Astronautica, 38, 103-113. (pdf)
Huang, W. and Pellegrino, S. (1996). Shape-memory alloy actuators
for deployable structures: Phase I. Cambridge University Engineering
Department CUED/D-STRUCT/TR163.
Huang, W., Pellegrino, S. and Bashford, D. P. (1996). Shape-memory
alloy actuators for deployable structures. In Proc. Spacecraft
Structures, Materials, and Mechanical Testing, 27-29 March 1996,
Noordwijk pp 53-61. ESA SP-386.
Kawaguchi, K., Hangai, Y., Pellegrino, S. and Furuya, H. (1996).
Shape and stress control analysis of prestressed truss structures.
Journal of Reinforced Plastics and Composites, 15, 1226-1236.
King, S. A. and Pellegrino, S. (1996). Parametric excitation
and dynamic instabilities in thin-walled deployable booms. In Proc.
Spacecraft Structures, Materials, and Mechanical Testing, 27-29
March 1996, Noordwijk pp 1153-1160. ESA SP-386.
Kumar, P. and Pellegrino, S. (1996). Deployment and retraction
of a cable-driven rigid panel solar array. Journal of Spacecraft
and Rockets, 33, 836-842.
Tan, G. E. B. and Pellegrino, S. (1996). Non-linear dynamic identification:
an application to prestressed cable systems. In Proc. Structural
Dynamics Eurodyn'96, 5-8 June 1996 Florence (Edited by G. Augusti,
C. Borri and P. Spinelli), pp 941-948, Balkema, Rotterdam.
You, Z. and Pellegrino, S. (1996). Cable-stiffened pantographic
deployable structures. Part 1: Triangular Mast. AIAA Journal, 34,
813-820.
You, Z. and Pellegrino, S. (1996). New solutions for foldable
roof structures. In Proc. Mobile and Rapidly Assembled Structures
II, 17-19 June, Seville (Edited by F. Escrig and C. A. Brebbia),
pp 35-44, Computational Mechanics Publications.
1995
Guest, S. D. and Pellegrino, S. (1995). Development of a new
solid surface deployable antenna. In Proc. ESA Workshop on Antenna
Technologies, 21-23 November 1995, ESTEC, Noordwijk pp 6.3.1-6.3.11.
ESA-WPP-100.
Kumar, P. and Pellegrino, S. (1995). Deployment and retraction
of cable-driven rigid panel solar arrays. In Proc. 36th SDM Conference,
10-12 April 1995, New Orleans pp 1724-1733, AIAA 95-1367.
Kumar, P. and Pellegrino, S. (1995). Deployment and retraction
of a cable-driven solar array: testing and simulation. In Proc.
29th Aerospace Mechanisms Symposium, 17-19 May 1995, NASA Johnson
Space Center, Houston (Edited by W. C. Schneider), pp 253-267.
NASA CP-3293.
Pellegrino, S. (1995). Adaptive shape control of mesh reflectors.
In Proc. ESA Workshop on Antenna Technologies, 21-23 November 1995,
ESTEC, Noordwijk pp 3.1.1-3.1.9, ESA-WPP-100.
Pellegrino, S. (1995). Large retractable appendages in spacecraft.
Journal of Spacecraft and Rockets, 32, 1006-1014.
You, Z. and Pellegrino, S. (1995). Structural concept of a deployable
mesh reflector. In Proc. ESA Workshop on Antenna Technologies,
21-23 November 1995, ESTEC, Noordwijk pp 6.2.1-6.2.14. ESA-WPP-100.
1994
Guest, S. D. and Pellegrino, S. (1994). The folding of triangulated
cylinders, Part I: geometric considerations. ASME Journal of Applied
Mechanics, 61, 773-777.
Guest, S. D. and Pellegrino, S. (1994). The folding of triangulated
cylinders, Part II: the folding process. ASME Journal of Applied
Mechanics, 61, 778-783.
Kawaguchi, K., Furuya, H. and Pellegrino, S. (1994). Shape and
stress control of prestressed truss structures. Technical Report
CUED/D-STRUCT/TR145 Cambridge University Engineering Department.
Kawaguchi, K., Pellegrino, S., Furuya, H. and Hangai, Y. (1994).
Shape and stress control analysis of prestressed truss structures.
In Proc. 5th International Conference on Adaptive Structures, 5-7
December, Sendai, Japan (Edited by J. Tani, E. J. Breitbach, B.
K. Wada, M. Uchiyama and S. Chonan), pp 184-193, Technomic Publishers.
Kwan, A. S. K. and Pellegrino, S. (1994). Design and performance
of the Octahedral Deployable Space Antenna (ODESA). International
Journal of Space Structures, 9, 163-173.
Kwan, A. S. K. and Pellegrino, S. (1994). Matrix formulation of
macro-elements for deployable structures. Computers and Structures,
50, 237-254.
Kwan, A. S. K. and Pellegrino, S. (1994). A new concept for large
deployable space frames. International Journal of Space Structures,
9, 153-162.
You, Z. and Pellegrino, S. (1994). Deployable mesh reflector. In
Spatial, Lattice and Tension Structures. (Proceedings of IASS-ASCE
Symposium held in Atlanta, April 1994), (Edited by J. F. Abel,
J. W. Leonard and C. U. Penalba), pp 103-112, ASCE, New York.
You, Z. and Pellegrino, S. (1994). Dynamic deployment of the CRTS
reflector. In Proc. 35th Structures, Structural Dynamics and Materials
Conference, 18-20 April 1994, Hilton Head, SC pp 1497-1505,
AIAA Paper 94-1504.
You, Z. and Pellegrino, S. (1994). Study of the folding and deployment
aspects of a Collapsible Rib Tensioned Surface (CRTS) Antenna reflector.
Technical Report CUED/D-STRUCT/TR144, Department of Engineering,
University of Cambridge. (pdf)
1993
Kwan, A. S. K. and Pellegrino, S. (1993). Design and performance
of the Octahedral Deployable Mast. In Space Structures 4, Proceedings
of Fourth International Conference on Space Structures, Guildford,
6-10 September 1993, (Edited by G. A. R. Parke and C. M. Howard),
843-852, Thomas Telford, London.
Kwan, A. S. K. and Pellegrino, S. (1993). Prestressing a space
structure. AIAA Journal, 31, 1961-1963.
Kwan, A. S. K., You, Z. and Pellegrino, S. (1993). Active and passive
cable elements in deployable masts. International Journal of Space
Structures, 8, 29-40.
Lipscombe, P. R. and Pellegrino, S. (1993). Free rocking of prismatic blocks. ASCE Journal of Engineering Mechanics, 119(No. 7, July), 1387-1410.
Pellegrino, S. (1993). Special Issue on Deployable Space Structures.
International Journal of Space Structures, vol. 8..
Pellegrino, S. (1993). Structural computations with the Singular
Value Decomposition of the equilibrium matrix. International Journal of Solids and Structures,
30, 3025-3035.(pdf)
Pellegrino, S. and You, Z. (1993). Foldable ring structures. In
Space Structures 4. Proceedings of Fourth International Conference
on Space Structures, Guildford, 6-10 September 1993, (Edited by
G. A. R. Parke and C. M. Howard), 783-792, Thomas Telford, London.
1992
Calladine, C. R. and Pellegrino, S. (1992). Further remarks on
first-order infinitesimal mechanisms. International Journal of
Solids and Structures, 29, 2119-2122.(pdf)
Guest, S. D. and Pellegrino, S. (1992). Inextensional wrapping
of flat membranes. In Proc. First International Seminar on Structural
Morphology, Montpellier, La Grand Motte, 7-11 September 1992 (Edited
by R. Motro and T. Wester), 203-215, LMGC, Universite Montpellier
II.
Pellegrino, S. (1992). A class of Tensegrity domes. International
Journal of Space Structures, 7, 127-142.(pdf)
Pellegrino, S. (1992). Retractable appendages in spacecraft: a
review. ESA Report.
Pellegrino, S., A. S. K. Kwan, et al. (1992). Reduction of equilibrium, compatibility and flexibility matrices, in the Force Method. International Journal of Numerical Methods in Engineering, 35, 1219-1236.
1991
Calladine, C. R. and Pellegrino, S. (1991). First-order infinitesimal
mechanisms. International Journal of Solids and Structures, 27,
505-515.
Kwan, A. S. K. and Pellegrino, S. (1991). The Pantographic Deployable
Mast: design, structural performance and deployment tests. In Rapidly
Assembled Structures, (Edited by P. S. Bulson), 213-224, Computational
Mechanics Publications.
Palombini, F. and Pellegrino, S. (1991). Parameter estimation in
experimental modal analysis: comparison of existing techniques
and application to a deployable mast. Technical Report CUED/D-STRUCT/TR139,
Department of Engineering, University of Cambridge.
Pellegrino, S. (1991). Active and passive cable elements in deployable
masts. In Proc. 42nd IAF Congress, Montreal, Paper IAF-91-313.
Pellegrino, S. and C. R. Calladine (1991). Structural computation of an assembly of rigid links, frictionless joints and elastic springs. Journal of Applied Mechanics, 113 (September), 749-753.
1990
Kwan, A. S. K. and Pellegrino, S. (1990). A cable-rigidised 3D
pantograph. In Proc. Fourth European Space Mechanisms & Tribology
Symposium, Cannes, 149-154. ESA ESA-SP-299.
Pellegrino, S. (1990). Analysis of prestressed mechanisms. International
Journal of Solids and Structures, 26, 1329-1350.
Pellegrino, S. and T. F. van Heerden (1990). Solution of equilibrium equations in the Force Method: a compact band method for underdetermined linear systems. Computers & Structures, 37(5), 743-751.
1989
Calladine, C. R. and S. Pellegrino (1989). Discussion of: Characteristics of cable nets, by O. Vilnay. ASCE Journal of Structural Engineering 115(7), 747-748.
Kwan, A. S. K. and Pellegrino, S. (1989). A new deployable mast.
In Proc. Canadian Congress Applied Mechanics, Ottawa (Edited by
M. A. Erki and J. Kirkhope), 334-335.
Lipscombe, P. R. and S. Pellegrino (1989). Rocking of rigid block systems under dynamic loads. Applied Solid Mechanics 3 (edited by I. M. Allison and C. Ruiz), Elsevier Applied Science Publishers, 175-189.
1988
Pellegrino, S. (1988). On the rigidity of triangulated hyperbolic paraboloids. Proceedings of Royal Society of London A 418, 425-452.
Pellegrino, S. (1988). Efficient upper-bound limit analysis. International Journal of Mechanical Sciences 30(7), 455-474.
1987
Pellegrino, S. (1987). Upper bound plastic collapse analysis of frameworks. Computational Plasticity, (edited by D. R. J. Owen, E. Hinton and E. Onate). Swansea, Pineridge Press, 589-604.
1986
Pellegrino, S. (1986). Mechanics of kinematically indeterminate structures, Ph.D. Dissertation, University of Cambridge, U.K.
Pellegrino, S. and C. R. Calladine (1986). Matrix analysis of statically and kinematically indeterminate frameworks. International Journal of Solids and Structures, 22, 409-428.
1985
1984
Pellegrino, S. and C. R. Calladine (1984). Two-step matrix analysis of pre-stressed cable nets. III International Conference on Space Structures, Guildford, U.K., Elsevier Applied Science Publishers.(pdf)
